|
 |
- Intel® Core i7 Processor up to 2.53 GHz
- 6U CPCI universal System/Peripheral board, Support for Hot Swap
- Up to 4 MB shared cache
- Up to 8 GB soldered DDR3 SDRAM with ECC
- Up to 16 GB NAND Flash (soldered)
- Dual on-board Expansion Sites: 2 x PCI-X PMC and x8 PCIe XMC
- Front I/O: 2x Gigabit Ethernet ports, 1x VGA,1x USB, 1x COM port
- Rear IO: 2x Gigabit Ethernet ports (PICMG 2.16), 1x VGA, 2x DVI, 3x SATA, 2x COM, 4x USB ports, 12x GPIO
- Optional on-board SATA HDD
- Optional extended operating temperature range, conduction cooling
- Single slot 6U CPCI form factor
- Operating system support for VxWorks®, Linux®, and Windows®
|
 Read more |
|
 |
- Intel® Core™ i7 or Core i5 processors Dual core, up to 2.53 GHz
- Single slot 6U CPCI form factor, PICMG® compliant
- Up to 8 Gbyte DDR3 SDRAM (dual channel) with ECC in main memory (soldered)
- Up to 16 Gbyte NAND Flash (soldered)
- BIOS backup Flash
- User EEPROM
- Optional onboard SATA HDD
- Optional one or two PMC or XMC sites with rear PMC/XMC I/O signals
- Front I/O: 2x Gigabit Ethernet ports, VGA, 1x USB, 1x COM 3
- Rear I/O: 2x Gigabit Ethernet ports, VGA 1, DVI 1 and 2, 3x SATA interfaces, COM 1 and 2 ports, 4x USB ports and GPIOs
|
 Read more |
|
 |
- Intel® Core™ 2 Duo processor up to 2.16 GHz
- Intel Celeron® M processor ULV 423, 1.06 GHz
- PICMG® 2.1 (Hot Swap ) and PICMG 2.16 compliant
- Single slot with System and non-system functionality
- Up to 4 GB DDR2 SDRAM (200 MHz) with ECC
- Flash drive or local UDMA100 2.5” hard disk
- 2 x SATA, RAID 0/1 capable
- Front/rear VGA up to 1280 x 1024, rear DVI-I up to 1280 x 1024, 32 MB RAM
- Two Gigabit Ethernet ports 10/100/1000 BaseT front or rear optional
- Two PMC extension slots, one 64-bit/133 MHz and one 32-bit/33 MHz
- One XMC interface on request
- 2 x serial I/O with FIFOs RS-232/422/485 interface 4 x USB 2.0 ports, Audio codec
- Watchdog, temperature sensors
- Optional –40 °C to +85 °C Optional conduction cooling conformal coating
- High shock and vibration immunity with stiffener bars and wedge locks
|
 Read more |
|
 |
- 32nm Intel® Core™ i7-620 SV, LV, ULV processors with ECC
- Up to 8GB DDR3-1066 ECC soldered memory
- Two 64-bit/133MHz PMC sites with rear signals
- Optional PCI-Express x8 XMC site
- Supports system/peripheral universal mode
|
 Read more |
|
 |
- Intel® Core™2 Duo SV, LV, ULV processors, up to 2.26GHz
- Up to 8GB DDR3-1066 memory
- Two 64-bit/133MHz PMC sites or
- Two PCI-Express x8 XMC sites
- Supports system/peripheral universal mode
|
| Read more |
|
 |
- MPC7448 running at 1.4 or 1.7 GHz
- 512MB, 1 or 2GB of SDRAM-DDR with ECC.
- 64, 128 or 256MB of soldered Mirror Flash.
- Up to 1 GB soldered Nand Flash.
- PPC Real Time clock and four 32 bit-timers.
- 32 or 64-bit CompactPCI bus interface.
- Two PMC sites with IO routing toward J3 / J5.
- Three Ethernet 10/100/1000TX port
- One USB2 controller with two rear and one front ports.
- A four channels SATA controller with two ports on J3
|
| Read more |
Also visit our Suppliers Web Sites for additional product information |
For assistance, marketing or technical contact - sales@ri-tech.co.za
|
